Signal/Peak Led ’S; Talk To; Fader - Crest Audio X-Four Owner's Manual

group aux level features
/
signal/peak LED 's
This dual color LED responds to the pre-fader signal. It illuminates
LED
green with varying brightness in proportion to the audio signal.When the
signal approaches clipping, the LED illuminates red.
talk to—fader 1–4
This switch adds the
level of the
TALKBACK
section.
TER

fader

The fader normally controls the level at which the
any assigned buses or outputs. When the
selected, the fader controls the level of the
after-fader listen—
Pressing this switch will include or exclude the fader signal (when not
illuminated).
system output to the fader signal.The
TALKBACK
signal is set by the
TALKBACK
REVERSE AUX
AUX
AFL
level control in the -
MAS
signal is sent to
GROUP
/ switch is
GROUP
output.
group module
3
p. 51