Aux Send Features; Aux Stereo 5/6 - Crest Audio X-Four Owner's Manual

aux send features

Six auxiliary
AUX SENDS
These mixes can be used for driving effects processors, providing monitor
mixes, creating broadcast or alternate sound reinforcement mixes, or
other special requirements.
aux sends 1–6
These knobs adjust the amount of signal sent to the
Unity gain occurs at the zero setting.
when selected for stereo operation.
aux 1–4, 5/6 pre-fader—PRE
The default signal source for the
are used for selecting the pre-fader signal for their respective auxes.The
pre-fader signal is derived post-mute and post-eq.
see—internal jumper options
are post-eq, post-mute, and post-fader.
AUX SENDS
are post-eq, post-mute, and pre-fader.
AUX SENDS

aux stereo 5/6

The default configuration for
In situations where stereo-aux signals are required (such as driving stereo
in-ear monitors or effects processors), this switch reconfigures the
to operate in stereo by changing the functions of the potentiometers.
SENDS
are configured as individual mono sends.
AUXES
are configured as level and pan for stereo operation.
AUXES
are available for creating individual output mixes.
6 and 8 controls pan function
AUX
is post-fader.These switches
AUX SENDS
5 , and 6 , are mono, as with
AUX
mono input module
buses.
AUX
1–4 .
AUX
AUX
1
p. 13