Global Configuration Commands; Atm Interface And Subinterface Commands - Cisco 10000 Series Configuration Manual

Chapter 2 8-Port E3/DS3 ATM Line Card Configuration

Global Configuration Commands

A PVC boilerplate is a PVC description that you can apply to one or more PVCs or interfaces.
To create a PVC boilerplate, use the vc-class atm command in global configuration mode:
vc-class atm class_name
Where class_name is any value that describes the VC class.
After you enter the vc-class atm command, you enter VC class configuration mode. In this mode, you
describe the action you want the class to take by entering commands and their arguments. These
commands and arguments are described in the
In the following example, an ATM VC class named paris is created and defined. This example shows
how to specify that the class uses AAL5+MUX encapsulation and a VBR-NRT PVC.
Router(config)# vc-class atm paris
Router(config-vc-class)# encapsulation aal5mux ip
Router(config-vc-class)# vbr-nrt 30000 20000 128
Router(config-vc-class)# exit
Router(config)#
For information on applying a VC class name, see the
Subinterface" section on page 2-12
page

ATM Interface and Subinterface Commands

This section describes how to configure ATM interfaces and subinterfaces using the principle commands
described in the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-8834-04
2-18.
Setting the Line Card to E3 or T3 mode, page 2-8
Setting the Line Card Framing, page 2-9
Changing the Mode of the Line Card, page 2-8
Creating and Entering Subinterfaces, page 2-10
Attaching an ATM VC Class to an Interface or Subinterface, page 2-12
Creating ATM PVPs, page 2-12
Creating a PVC, page 2-13
Enabling ATM ILMI, page 2-14
Activating ATM ILMI PVC Discovery, page 2-14
Specifying the ATM ILMI Keep-Alive Rate, page 2-14
Configuring the ATM Clock, page 2-15
Configuring Cable Length, page 2-15
Controlling ATM Alarm Reporting, page 2-15
Running Loopbacks, page 2-16
"ATM PVC Commands" section on page
"Attaching an ATM VC Class to an Interface or
and the "Attaching an ATM VC Class to a PVC" section on
Cisco 10000 Series Router Line Card Configuaration Guide
Line Card Commands
2-16.
2-7