Cisco 10000 Series Configuration Manual page 185

4-Port Channelized OC-3/STM-1 Line Card
Configuration
This chapter describes the procedures for configuring the Cisco 10000 series 4-Port Channelized
OC-3/STM-1 line card, hereafter known as the 4-Port Channelized OC-3/STM-1 line card.
The 4-Port Channelized OC-3/STM-1 line card uses fractional T1 (n x DS0), DS-1, E1, fractional E1
(n x DS0) and DS3 IP services to connect ISP customers to the network backbone. It provides full duplex
operation at OC-3 bandwidth rates using a (single-mode) fiber optic port that provides the Cisco 10000
series router with a single interface that connects up to 768 individual channelized options.
This chapter contains the following sections:
Software Support, page 7-2
•
SONET Channelization, page 7-2
•
SDH Channelization, page 7-3
•
Default Values, page 7-4
•
• Interface Syntax, page 7-8
• SONET-Framed Interface Configuration Sample, page 7-8
• SDH-Framed Interface Configuration Sample, page 7-10
Configuring the SONET Controller for SONET or SDH Framing, page 7-14
•
Creating a T3, VT, or AUG Controller, page 7-15
•
OL-8834-04
C H A P T E R
Cisco 10000 Series Router Line Card Configuaration Guide
7
7-1