Honda Accord 4D 2003-2006 Owner's Manual page 89

03/09/03 14:17:10 32SEA610_089
Indicator Lights
Parking Brake and
Brake System Indicator
This light has two functions:
1. This indicator comes on when you
turn the ignition switch to ON (II).
It is a reminder to check the
parking brake. If you drive at
certain speeds without fully
releasing the parking brake, the
beeper sounds continuously.
Driving with the parking brake not
fully released can damage the
brakes and tyres.
2. If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
86
Instruments and Controls
Immobilizer System
Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will then go off
if you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page 108 ).
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
483 .
Anti-lock Brake System
(ABS) Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). If this
indicator comes on at any other time,
there is a problem in the ABS. If this
happens, take the car to your dealer
to have it checked. With the
indicator on, your car still has normal
braking ability but no anti-lock. For
complete information, see page 330 .