Honda Accord 4D 2003-2006 Owner's Manual page 249

03/09/03 14:40:59 32SEA610_249
Audio System (C, D Type)
Operation
Select the CD changer by pressing
the CD button. You will see ''CD'' in
the display. The system will begin
playing the last selected disc in the
CD changer. You will see the disc
and track numbers displayed.
When that disc ends, the next disc in
the CD changer is loaded and played.
After the last disc finishes, the
system returns to disc one.
To select a different disc, press the
appropriate side of a preset bar (1
6). If you select an empty position in
the CD changer, the system will go
into the loading sequence (see page
244 ).
You can use the SKIP bar while a
disc is playing to select passages and
change tracks.
246
Comfort and Convenience Features
To move rapidly within a track, press
and hold the left or right side of the
SKIP bar. You will hear a beep and
the system will continue to move.
Press to move forward, or
to move backward. Release the
bar when the system reaches the
point you want.
Each time you press
release it, the system skips forward
to the beginning of the next track.
Press and release
backward to the beginning of the
− current track. Press and release it
again to skip to the beginning of the
previous track.
SCAN This feature, when
−
activated, samples all the tracks on
the selected disc in the order they
are recorded on the CD. To activate
the Scan feature, select the Scan
mode by pressing the SCAN button.
You will see SCAN in the display.
The system will then play the first
track for approximately ten seconds.
If you do nothing, the system will
then play the following tracks for ten
seconds each. When it plays a track
that you want to continue listening to,
press the SCAN button again.
D-SCAN −
activated, samples each first track of
and all the discs in the CD changer in the
order they are stored. To activate
the Scan feature, select the D-Scan
to skip mode by pressing and holding the
SCAN button. You will see D-SCAN
in the display. The system will then
play the first track of the first CD for
approximately ten seconds.
If you do nothing, the system will
then play the next CD's first track.
When it plays a disc that you want to
continue listening to, press the
SCAN button again.
This feature, when