Honda Accord 4D 2003-2006 Owner's Manual page 422

03/09/03 15:08:28 32SEA610_422
6. Install the rubber seal over the
back of the headlight assembly.
Make sure it is right side up; it is
marked ''TOP.''
7. Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
Turn on the headlights to test the
new bulb.
8. On the left side, reinstall the air
intake cover. Reinstall the three
fasteners and secure them by
pushing on the heads until they
lock.
After replacing the high beam
headlight bulb, put the cover back
in place and turn it clockwise
securely.
Replacing a Front Turn Signal
Light Bulb
SOCKET
Petrol models
1. Open the bonnet.
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn anticlockwise.
SOCKET
Diesel models
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Turn on the lights to make sure
the new bulb is working.
Maintenance
Lights
419