Honda Accord 4D 2003-2006 Owner's Manual page 373

03/09/03 15:00:14 32SEA610_373
Cooling System (Petrol models)
1. Make sure the engine and radiator
are cool.
2. Turn the radiator cap anticlock-
wise, without pressing down on it,
until it stops. This relieves any
pressure remaining in the cooling
system.
3. Remove the radiator cap by
pushing down and turning
anticlockwise.
370
Maintenance
RADIATOR CAP
RESERVE TANK
4. The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill. Clean
up any spills immediately. Spilled
coolant could damage components
in the engine compartment.
5. Put the radiator cap back on.
Tighten it fully.
6. Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your car's cooling
system. They may not be compatible
with the coolant or engine compo-
nents.