Spark Plugs (Petrol Models); Replacement - Honda Accord 4D 2003-2006 Owner's Manual

03/09/03 15:04:31 32SEA610_397
Fuel Filter, Spark Plugs (Petrol models)
5. Remove the rubber hose and
tighten the water draining screw
securely by hand.
6. The fuel system also requires the
air bleeding. To prime the fuel
system, follow the instructions
from step 3 to step 6 of the
Priming the Fuel System
pages 433 and 434 ).
7. Make sure that the fuel has not
leaked.
If you are not sure how to drain the
water, contact your Honda dealer.
After the vehicle has been stored for
an extended period, the engine may
not start. This may be caused by air
in the fuel system. In this case,
follow the procedure for
(see page
the Fuel System
394
Maintenance
Spark Plugs
(Petrol models only)
2.0 engine model
The spark plugs in your car should
be replaced according to the distance
recommendation in the maintenance
schedule.
(see
2.4 engine model
The spark plugs in your car are a
special iridium-tipped design for
longer life. The spark plugs should
be replaced according to the time or
distance recommendations in the
maintenance schedule.
Priming
433 ).

Replacement

COIL
BOLT
COVER
NUTS
1. Remove the two nuts and the two
bolts with a wrench, then remove
the coil cover.
2. Clean off any dirt and oil that have
collected around the ignition coils.
BOLT