Honda Accord 4D 2003-2006 Owner's Manual page 404

03/09/03 15:05:39 32SEA610_404
BLADE
Remove the blade from its holder
3.
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
BLADE
REINFORCEMENT
Examine the new wiper blades. If
4.
they have no plastic or metal rein-
forcement along the back edge,
remove the metal reinforcement
strips from the old wiper blade and
install them in the slots along the
edge of the new blade.
Wiper Blades
5. Slide the new wiper blade into the
holder until the tabs lock.
6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm down against
the windscreen.
Lower the passenger's side first,
then the driver's side.
Maintenance
401