Powering On The Router; Verifying Before Power-On; Displaying Boot Information - HP FlexNetwork HSR6800 Installation Manual

Figure 41 Setting terminal emulation in test Properties dialog box

Powering on the router

Verifying before power-on

Before powering on the router, verify the following items:
•
The power supplies and fan trays are correctly installed.
•
The power cord and grounding cable are correctly connected.
•
The power source voltage meets the requirement of the router.
•
The console cable is correctly connected, the terminal or PC used for configuration has started,
and the configuration parameters have been set.
•
If a CF card is used, verify that the CF card is in position.
•
Make sure the installed LPUs and HIMs/MIMs are in position.
Powering on the router
•
Turn on the switch of the power supply system for the router.
•
Turn on the switch of the AC or DC power supplies.

Displaying boot information

Power on the router. The following information is displayed:
1.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
34