Sap-28Ge - HP FlexNetwork HSR6800 Installation Manual

Product
code
JD096C
JD097C
JG081C
JC784C
NOTE:
Use transceiver modules for the fiber ports provided by Hewlett Packard Enterprise only. The router
might be incompatible with transceiver modules from other vendors. The system generates an alarm
when a transceiver module from another vendor is installed.

SAP-28GE

SAP-28GE front panel
Figure 84 SAP-28GE front panel
(1) SFP ports (GE0 to GE15)
(3) Operating status LED (RUN)
SAP-28GE specifications
Item
Memory type and size
NVRAM
SFP ports
Description Length
SFP+ SFP+
0.65m DA Cable
HPE X240 10G
SFP+ SFP+ 1.2m 1.2 m (3.94 ft)
DA Cable
HPE X240 10G
SFP+ SFP+ 3m
3 m (9.84 ft)
DA Cable
HPE X240 SFP+
SFP+ 5m DAC 5 m (16.40 ft)
Cable
HPE X240 10G
SFP+ SFP+ 7m
7 m (22.97 ft)
Direct Attach
Copper Cable
Specification
•
Default—Two 2-GB DDR3 SDRAMs.
•
Maximum—Four 2-GB DDR3 SDRAMs.
128 KB.
16 × SFP ports, 100/1000 Mbps auto-sensing.
The following transceiver modules are available for the SFP ports:
•
100 Mbps SFP transceiver modules.
•
1000 Mbps SFP transceiver modules.
•
100/1000 Mbps SFP transceiver modules.
•
10/100/1000 Mbps SFP copper transceiver modules supporting
Data rate
(2) Combo interfaces (GE16 to GE27)
113
Remarks
connecting SFP+
ports