HP FlexNetwork HSR6800 Installation Manual page 116

Item
SFP ports
Combo interfaces
10G SFP+ ports
Hot swapping
SAP-20GE2XP fixed Ethernet port specifications
Table 54 SFP port specifications
Item
Connector type
Transceiver module
type
Network
synchronization
1588v2.2 protocol
Interface standards
Operating mode
Table 55 Transceiver modules available for the SFP ports
Product
code
JD089B
JD102B
JD120B
JD090A
JD091A
Specification
16 × SFP ports, 100/1000 Mbps auto-sensing.
The following transceiver modules are available for the SFP ports:
•
•
•
•
Four.
•
•
2.
Supported.
Specification
LC
SFP
Supported
Supported
802.3, 802.3u, and 802.3ab
1000 Mbps, full duplex
Central
Description
wavelength
HPE X120 1G
SFP RJ45 T N/A
Transceiver
HPE X110 100M
SFP LC FX 1310 nm
Transceiver
HPE X110 100M
SFP LC LX 1310 nm
Transceiver
HPE X110 100M
SFP LC LH40 1310 nm
Transceiver
HPE X110 100M
1550 nm
SFP LC LH80
100 Mbps SFP transceiver modules.
1000 Mbps SFP transceiver modules.
100/1000 Mbps SFP transceiver modules.
10/100/1000 Mbps SFP copper transceiver modules supporting
fiber-to-copper conversion.
Copper port—Straight-through/crossover autosensing:
10/100 Mbps, half/full-duplex.
1000 Mbps, full-duplex.
Fiber port—1000 Mbps, full-duplex.
Connector
RJ-45
LC
LC
LC
LC
110
Max
Optical fiber transmission
distance
Category 5 or
above twisted 100 m (328.08 ft)
pair cables
62.5/125 µm,
2 km (1.24 miles)
multi-mode
9/125 µm,
15 km (9.32 miles)
single-mode
9/125 µm,
40 km (24.86 miles)
single-mode
9/125 µm,
80 km (49.71 miles)
single-mode