Fip-210 - HP FlexNetwork HSR6800 Installation Manual

Product
code
NOTE:
The BIDI modules must be used in pairs. For example, if you install JD098B in the local port, you
must install JD099B in the peer port.
Maximum interface modules provided by the FIP-110 in full configuration
FIP/Interface
module
FIP-110
MIM
HIM

FIP-210

The FIP-210 provides two combo interfaces. It can hold two HIMs, two MIMs, or a mix of a HIM and
a MIM. MIMs are installed in the lower two slots of the FIP-210.
FIP-210 front panel
Figure 74 FIP-210 front panel
(1) Combo interface 1
(3) Slot 1
(5) OPEN BOOK mark
FIP-210 specifications
Item
Memory type and size
NVRAM
Combo interface
Central
Description
wavelength
SFP LC LH100
Transceiver
HSR6802
2
8
Not supported
Remarks
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
128 KB
2
2 copper ports (MDI/MDIX
autosensing)
2 fiber ports
Connector
HSR6804
4
16
Not supported
(2) Combo interface 0
(4) Slot 2
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex
95
Max.
Optical fiber transmission
distance
single-mode
(62.14 miles)
optical fiber
HSR6808
8
32
Not supported