HP FlexNetwork HSR6800 Installation Manual page 130

Figure 96 SAP-4EXP LEDs
Table 71 SAP-4EXP LED description
LED
RUN
(green)
Status
LEDs for
SFP+ 0 to
(yellow/green) SFP+ 3
Figure 97 SAP-20GE2XP LEDs
Table 72 SAP-20GE2XP LED description
LED
RUN
(green)
Status
LEDs for
SFP+ port
(yellow/green)
0 and
Status
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
Off
Steady green
Flashing green
Steady yellow
Status
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
Off
Steady green
Flashing green
124
Description
No power input is available or the SAP-4EXP has
failed.
The SAP-4EXP is operating correctly.
System software is being loaded or the SAP-4EXP
is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-4EXP when
system software is being loaded.
No link is present.
A 10 Gbps link is present.
Data is being received or transmitted at 10 Gbps.
The transceiver module failed to be detected.
Description
No power input is available or the SAP-20GE2XP
has failed.
The SAP-20GE2XP is operating correctly.
System software is being loaded or the
SAP-20GE2XP is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-20GE2XP
when system software is being loaded.
No link is present.
A 10 Gbps link is present.
Data is being received or transmitted at 10 Gbps.