Preparing Configuration Files And Restarting Raid Manager (Horcm) - HP XP User Manual

Storage adapter for microsoft volume shadowcopy

Table of Contents

Edit the file with a text editor using single-byte alphanumeric characters (SJIS code set). End

each line with a line feed.

Items which include brackets ([ ]) in the list must be enclosed in single-byte brackets.

Explanations of each item and entry formats:

Log file size — Specify the log file size.

You can change the size of an output log file in megabytes.

Specify the size in the range of 1-100. Specify <size> in single-byte decimal numbers.

*Leading zeros (0) are not required.

100M is described by default.

If this value is omitted, a non-allowed value is used, or the value is outside the maximum

and minimum values, the value of 10M is used.

Formatting:

[MaxFileSize=<size>]

Number of log generations — When a log file exceeds the size specified in the log file size,

rotate and specify the number of generation of the backup file to create.

You can change the number of output log file generations with the value in <number–of-

generations>.

Specify the number in the range of 1-255. Specify < number–of- generations> in single-byte

decimal numbers.

*Leading zeros (0) are not required.

The number of generations is set to three by default.

If this value is omitted, a non-allowed value is used, or the value is outside the maximum

and minimum values, five is used as the number of generations.

Formatting:

[MaxBackupIndex= <number of- generations>]

Example 2 Maintenance configuration file

[MaxFileSize=100]

[MaxBackupIndex=3]

When the same item is listed on multiple lines

When the log file size or the number of log generations is on multiple lines, the final line takes

precedence. In the following example, 30 becomes the log file size.

Example:

[MaxFileSize=100]

[MaxFileSize=30]