E10000Db - HP XP User Manual

[XP7]
◦
1) In the case of the virtual DKC, confirm that the virtual LDEV ID which has been
assigned to RSG has some free space.
◦
2) Confirm whether the state where virtual LDEV ID has not been set to physical LDEV
ID of LDEV to be created (Virtual LDEV ID will be FF:FE) or the reserve state for HA
(Virtual LDEV ID will be FF:FF). If the virtual LDEV ID has not been assigned, assign
it.
◦
3) In the case of the virtual DKC which straddles multiple physical DKCs, confirm that
the pool number specified in the configuration file exists in each physical DKC.
◦
4) If the pool of the pool number which was identical with the each physical DKC has
not been set, set the pool.
(2) An error occurred when an operation command was given to the disk array system.
See "About errors attributable to disk array systems" (page

E10000DB

Message
Shadow copy[LU number of S-VOL/V-VOL] is not mapped to a valid port
Explanation
Because the S-VOL/V-VOL is not being mapped, backup processing failed.
Recommended action
(1) Confirm that the problem does not fall under the limits of interrupt operation from other
applications. See Table 2.5.2 -1.
(2)Perform the following using Storage Management Software.
[XP P9500/XP7]
◦
1) Resynchronize the target Business Copy pair.
◦
2) Map the target S-VOL to the Host group with the name HP-VSS-HG and perform
resync processing. In addition, when a host group does not exist, create HP-VSS-HG
and perform a similar procedure.
[XP7]
In the case of virtual DKC, create a Host group name: HP-VSS-HG in RSG which P-VOL belongs
to, and perform a similar procedure.
E10000DD
Message
Failed to delete Business Copy pair - P-Vol:[ LU number of P-VOL] 'SVOL' or 'VVOL':[ LU number
of S-VOL or V-VOL]
Explanation
Cannot delete Business Copy pair.
92 Troubleshooting
133).