Placement Location Of Command Device Which Is Connected To Host; Support Scope Of Ha Configuration; Adapter Function - HP XP User Manual

Table 3 Support scope of RSG assignment of each resource (continued)
Resource
Host group ID
Pool (THP/Smart/FS)
1
1
Pool is not managed by RSG. However, a pool created only by LDEV which belongs to specific RSG can only be used
by a user who has RSG privileges.
NOTE: Even if P-VOL to be operated is assigned in meta_resource, it can be used if a user
has appropriate privileges.

Placement location of command device which is connected to host

Place a command device in each physical DKC when a command device is used in multiple
virtual DKCs.
Table 4 Support scope of placement location of command device which is connected to
host
Placement location
Only command device in physical
DKC
Only command device in virtual DKC
Command device in physical DKC
and virtual DKC

Support scope of HA configuration

This subsection indicates the support scope of HA configuration.

Adapter function

Table 5 Support scope of adapter function
Target
Primary site only
24 Environmental Prerequisites
RSG Assignment Privilege for RSG
Different RSG from With privilege
P-VOL
Without privilege
Same RSG as P-VOL With privilege
Without privilege
Different RSG from With privilege
P-VOL
Without privilege
Same RSG as P-VOL With privilege
Without privilege
Different RSG from With privilege
P-VOL
Without privilege
Support
Supported
Non-Supported
Non-Supported
Function
Creation of secondary VOL
Removal of secondary VOL
Secondary VOL pair
operations
Secondary VOL mapping
Support
Non-Supported
Non-Supported
Supported
Non-Supported
Non-Supported
Non-Supported
Supported
Non-Supported
Supported
Non-Supported
Remarks
Connecting only command device in
physical DKC to host is required.
Same as above.
Support
Supported
Supported
Supported
Supported
Remarks