2
Installation and Configuration
HP-FL Installation
Caution
Installation of the HP 27115A
Hp·FL
device adapter takes five steps:
1.
Configure the link into the operating system.
2.
Verify the position of jumper J2.
3.
Install the
Hp·FL peA.
4.
Connect the fiber-optic cable.
5.
Verify the
link operation.
The HP 27115A Fiber-Optic Link
(HP.FL)
printed circuit assembly
(peA)
is
susceptible to damage by electrostatic discharge (ESD). If possible, work in a
static-free work area.
•
Handle the
peA
by its edges or extractor levers
•
Avoid working on a carpet
•
Reduce unnecessary movements.
These precautions will lessen the chances of ESD damage.
ESD can damage any electronic assembly. Failure to follow anti-ESD precautions
can void your warranty.
If you do not have a static-free work area, we recommend a workstation kit, like
the one provided as part number 9300-1155. It has a grounding wrist strap, a
conductive work mat and other items to safely shunt any charge to ground.
Instructions for its use come with the kit.
Installation and Configuration
2-1