Table of Contents
Advertisement
E1000110
Message
Unable to find LDEV object for: [LU number of S-VOL/V-VOL].
Explanation
S-VOL/V-VOL for the indication was not found.
Recommended action
A configuration change of storage occurred and S-VOL/V-VOL for the indication might have been
deleted. Refresh or reboot GUI tool and acquire the latest information.
E1000111
Message
vssUpdatePortInfo: Host Group GetPort info failed.
Explanation
Information of HG on which P-VOL to be processed is mapped, cannot be retrieved.
Recommended action
Check the RSG of HG resource group which maps the target volume using Storage Management
Software.
E1000118
Message
Failed to remove S-Vol LU: [LU number of S-VOL/V-VOL] path from HG: [Host group name].
Explanation
Could not remove S-VOL/V-VOL from the host group.
Recommended action
(1) Using Storage Management Software, unmaps S-VOL/V-VOL in the host group of the
host group name of the message column. In addition, delete V-VOL at the time of the backup
in Snapshot.
(2) Check that it does not come into conflict with the operational restrictions and points of
consideration when using RAID Manager. See Table 2.5.2-3.
(3) An error occurred when an operation command was given to the disk array system.
See
"About errors attributable to disk array systems" (page
(4)Because it took some time to delete the Snapshot pair during the backup completion
process using the Snapshot function, removal from the host group may have failed.
(Time required for deletion of Snapshot pair depends on the pool capacity used by the
Snapshot pair.)
Change "The number of secondary VOL unmapping retries" in the setup file if necessary.
E1000119
Message
Failed to remove S-Vol LU: [LU number of S-VOL/V-VOL]] path from Target: [Target number].
98
Troubleshooting
133).
Advertisement
Table of Contents
