Hach ANATEL PAT700 Operator's Manual page 119

PAT700 Total Organic Carbon Analyzer – Alarms
Table 7-3 Warning alarm messages
Code Message
131 UnableToStart4to20mAOutputs
132 UnableToStartPumpTest
133 UnableToStopPumpTest
134 UnableToCalibratePump
135 UnableToExportDataLog
136 UnableToExportAuditTrail
137 UnableToAddUser
138 UnableToEditUser
139 UnableToDeleteUser
141 UnableToAcknowledgeAlarms
142 UnableToDeleteAlarms
143 UnableToStartSelfClean
144 UnableToStopSelfClean
145 UnableToStartOnlineManualSample
146 UnableToStopOnlineManualSample
147 UnableToRestoreFactoryDefaults
148 UnableToStartVoltageTest
149 UnableToStartPlumbingTest
150 UnableToPrintDataLog
151 LampExtinct
153 Bottle1MarkedAsUsed
154 Bottle2MarkedAsUsed
155 Bottle3MarkedAsUsed
156 Bottle4MarkedAsUsed
157 ExcursionBottle1NotEmpty
158 ExcursionBottle2NotEmpty
Anatel
Alarm condition
Analyzer cannot start 4-20 mA output test.
Analyzer cannot start pump test.
Analyzer cannot stop pump test.
Analyzer cannot calibrate pump.
Analyzer cannot export data log.
Analyzer cannot export audit trail.
Analyzer cannot add a user.
Analyzer cannot edit a user.
Analyzer cannot edit a user.
Analyzer cannot acknowledge alarm.
Analyzer cannot delete alarms.
Analyzer cannot start self clean.
Analyzer cannot stop self clean.
Analyzer cannot start online manual sample.
Analyzer cannot stop online manual sample.
Analyzer cannot restore factory defaults.
Analyzer cannot start voltage test.
Analyzer cannot start plumbing test.
Analyzer cannot print data log.
• Analyzer detects that current lamp has failed.
• Replace UV lamp.
• Bottle installed in location 1 is marked as used.
• Replace bottle with a valid standard.
• Bottle installed in location 2 is marked as used.
• Replace bottle with a valid standard.
• Bottle installed in location 3 is marked as used.
• Replace bottle with a valid standard.
• Bottle installed in location 4 is marked as used.
• Replace bottle with a valid standard.
• Excursion bottle 1 is not empty.
• Remove excursion bottle 1 and replace with empty bottle.
• Excursion bottle 2 is not empty.
• Remove excursion bottle 2 and replace with empty bottle.
Page 109
Operator Manual