Brother FAX-2840 Service Manual page 90

Error code C7
Out of Memory
Press Stop key
There is insufficient memory to expand PC-print data.
Error code C8
---
An unidentified error occurred.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Error code C9 to CF
These errors do not usually occur in the normal use. The conceivable causes are noise
around the installation site, fluctuation of the power supply voltage, and failures in the
software.
---
An unidentified error occurred.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Error code D1
Print Unable D1
See Troubleshooting and routine maintenance chapter in User's Guide.
An error occurred while initializing the modem.
<User Check>
• Turn OFF and ON the power and check that the machine recovers.
Step
1 Modem PCB failure
2 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the modem PCB ASSY.
Replace the main PCB ASSY.
2-53
Remedy
Remedy
Remedy
Confidential