Main Fan - Brother FAX-2840 Service Manual

9.29 Main fan

(1) Disconnect the connector of the main fan from the high voltage power supply PCB
ASSY.
(2) Release the harness of the main fan from the guides of the main frame R ASSY.
(3) Release the two hooks, and remove the main fan.
High voltage power supply PCB ASSY
Hook
Label
Harness routing : Refer to
Assembling Note :
• When assembling the main fan, put the harness through the guide of the main frame R
ASSY before attachment.
• When assembling the main fan, place the attached label outward.
• When assembling the main fan, secure the harness to the position of above figure with
the tape.
Hook
Main fan
Fig. 3-48
"8. Main fan".
Connector
3-59
Guides
Tape
Main frame R ASSY
Confidential