Automatic Scanning Position Adjustment (Function Code: 57) - Brother FAX-2840 Service Manual

1.3.17 Automatic scanning position adjustment (Function code: 57)

<Function>
This function is used to automatically adjust the scanning start position.
<Operating Procedure>
(1) Connect the computer to the machine in the initial state of the maintenance mode.
(2) Double-click the "FILEDG32.EXE" file to start it. Select "Brother Maintenance USB
Printer".
(3) Drag and drop the "XXXX.prn" file onto the "Brother Maintenance USB Printer" icon.
Document data is printed.
(4) Cut the printed document data along the cutoff line to the A5 size.
(5) After cutting, set this in the document tray and adjust the document guide to the
document width.
Note:
• Fit the document guide to the document completely. Otherwise, the scanning start
position cannot be adjusted correctly.
(6) Press the [5] and [7] buttons in this order. "*********" appears on the LCD.
(7) Press the [Start] button. The scanning start position is automatically adjusted.
(8) When adjustment is completed, "*********" appears on the LCD.
Press the [Stop/Exit] button, and the machine returns to the initial state of the
maintenance mode.
5-27
Confidential