3.5.6 Wrinkles or creases
<User Check>
- Check that the paper is not damp.
- Check that the paper is loaded into the paper tray correctly.
- Check that the thickness of the paper is 60 to 105 g/m
- Turn over the stack of paper in the paper tray, or try rotating the paper 180 degrees in
the paper tray.
- Turn the green envelope levers in the direction of the black arrow. (Refer to
Step
Foreign object inside the fuser unit Remove the foreign object inside the fuser
1
2
Fuser unit failure
Cause
unit.
Replace the fuser unit.
Fig. 2-7
2-62
2
.
Fig.
Remedy
2-7.)
Confidential