Brother FAX-2840 Service Manual page 53

Error
Problem
codes
Detected discharge that may be
7D attributable to dirty corona wire
on the drum unit.
7E An unidentified error occurred.
The paper size set on the machine is
7F
smaller than the specified fax size.
The registration front sensor
detected that the paper set in the
80
paper tray was smaller than the
specified size.
81 An unidentified error occurred.
82 An unidentified error occurred.
Detected discharge when the
83 number of rotations of the drum
has exceeded twice the life limit.
The eject sensor remains ON
(paper pass detected) for more
84 than the specified time even
after the registration rear sensor
detected the end of paper pass.
85 An unidentified error occurred.
86 An unidentified error occurred.
87 An unidentified error occurred.
The eject sensor does not detect
paper pass after the registration
88
rear sensor detected the end of
paper pass.
89 An unidentified error occurred.
The registration front sensor
8A does not detect paper pass within
the specified time.
8B An unidentified error occurred.
8C An unidentified error occurred.
When the power switch was
turned ON, the eject sensor
8D
detected paper pass or detected
that the fuser unit cover was open.
8E An unidentified error occurred.
8F An unidentified error occurred.
Refer Error
to codes
2-37 90 An unidentified error occurred.
2-37 91 An unidentified error occurred.
2-38 92 An unidentified error occurred.
2-38 93 An unidentified error occurred.
2-38 94 An unidentified error occurred.
2-38 95 An unidentified error occurred.
2-39 96 An unidentified error occurred.
2-39 97 An unidentified error occurred.
2-40 98 An unidentified error occurred.
2-40 99 An unidentified error occurred.
The registration front sensor
detected that there was no paper
2-40 9A set in the manual feed slot when
feeding from the manual feed slot
was set.
The number of rotations of the
developer roller reached the
2-40 9B
upper limit when Continue Mode
is set for the toner cartridge.
The number of rotations of the
developer roller will reach the
2-40 9C
upper limit soon when Continue
Mode is set for the toner cartridge.
2-41 9D An unidentified error occurred.
2-41 9E An unidentified error occurred.
The registration front sensor
detected that the paper has run
2-41 9F
out when faxing or printing a list
or report.
2-42 A0 An unidentified error occurred.
The front cover sensor detected
2-42 A1
that the front cover was open.
The document scanning position
sensor detected that the document
2-42 A2
length was 90 cm or more while
scanning the document.
2-16
Refer
Problem
2-42
2-42
2-42
2-42
2-42
2-42
2-42
2-42
2-42
2-42
2-43
2-43
2-44
2-44
2-44
2-45
2-45
2-46
2-46
Confidential
to