Software Configuration; Setup The Ip Address Of Your Local Pc - EverFocus EAN600 User Manual

Software configuration:

Attention: Please install DirectX 9.0b or newer version first
Note: Please connect to Microsoft's Web Site for downloading:
For example: (This web site may change without notices.)
http://www.microsoft.com/downloads
How to check the current version of DirectX was installed?
Go to "Start", "Run", in command line: type "dxdiag", in a Popup window, you
will see the DirectX version in the location that had been marked at below.

1. Setup the IP address of your local PC.

Please go to "Internet Protocol (TCP/IP) Properties".
Start > Setting > Control Panel > network and Dial-up Connections > Local Area
Connection > Properties > Internet Protocol (TCP/IP) > Properties
Please fill in those numbers, which at below for setting IP configuration
IP：192.168.1.200
Net Mask：255.255.255.0
15
EAN600