Brazil Or Other Latin America Countries - Dect Frequency Configuration - Mitel 5603 Configuration Manual

Mitel 5603 Wireless Handset Configuration Guide
4 A dialog window appears, asking the user to decide whether to use the Number settings
in PDM or the Number settings in the device. Select "PDM".
The handset will automatically be synchronized and all data and parameter settings will
be transferred to the new handset. The synchronization will take a while if the Contacts
in the original handset contains a large number of contacts.
4.7 Brazil or other Latin America countries – DECT frequency configuration
Note: This chapter is only applicable if the handset is used in Brazil or other Latin American
countries.
In order to change the operating frequency band, the following preconditions must be fulfilled:
• The frequency set to "Not initiated". This can be checked by entering the Admin menu, see
Administration
Admin menu > Device info > Hardware.
Scroll down to "Frequency band".
• The handset must not have a DECT registration. If it already has, perform a Factory reset,
see 4.3 Perform a Factory reset
1 Enter the Admin Menu, see
2 Select "Frequency band" and select the desired band.
• LA (Latin America): 1910-1930 MHz
• Brazil: 1910-1920 MHz
3 Restart the handset.
4 Register the handset.
5 The frequency band option will no longer be available.
Note: The selection is persistent and will stand a factory reset.
10
on page 20, follow the path:
on page 7.
6 Administration on page 20.
6