Installation Of Handset In Ip-Dect System (Manually) - Mitel 5603 Configuration Manual

Mitel 5603 Wireless Handset Configuration Guide
Subscribe
Subscribe the handset towards the IP-DECT system. The subscription procedure is described in
the Mitel 5603 Wireless Handset User Guide. The User ID is used to identify the handset when
it is connected to PDM/WSM3 and will be visible in the Number column.
Note: The User ID can be viewed by navigating to the menu:
Admin menu > Device info > User ID
To find the Admin menu, see
See also examples of handset configurations that can be made in chapter
Configuration
3.2.2

Installation of Handset in IP-DECT System (Manually)

Subscribe the handset
1 Assign the extension number for the handset in the IP-DECT system. See the IP-DECT
Base Station V2 Installation and Operation Manual.
2 Subscribe the handset towards the IP-DECT system. The subscription procedure is
described in Mitel 5603 Wireless Handset User Guide.
In order to easily identify the handset, both the IPDI and the User ID are shown in the handset
when initiating the subscription procedure.
See also examples of handset configurations that can be made in chapter
Configuration
6
6.1 Admin Menu Tree
on page 13.
on page 13.
on page 18.
5 Handset
5 Handset