Set The Multi Lines Setting - Konica Minolta bizhub 360 User's Manual [Fk-502 Facsimile Operations

11

11.16 Set the Multi Lines Setting

Set the items for the additional line.
Note
The Multi Line Setting can be set only when 2 lines are used.
Telephone Line Setting
Set the parameter for the additional line.
Item
Telephone Line Set-
ting
*
indicates factory default setting.
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
11-64
Description
Dialing Method Set the dialing method for
the Line 2 (additional line).
Number of RX Call Set the arrival frequency
Rings for the Line 2 (additional
line). Set the pseudo ring
back tone frequency after
the arrival until receiving is
started.
Line Monitor Sound To hear the sound on the
line from the speaker at the
time of transmission with
the Line 2 (additional line),
set it to ON.
Line Monitor Sound Set the sound volume of
Volume the speaker.
Utility Mode
Available value
*
PB / 10pps
*
0-15 (2 times )
*
ON / OFF
*
0-31 (16 )
bizhub 360