Konica Minolta bizhub 360 User's Manual [Fk-502 Facsimile Operations page 350

Explanation of Reports and Lists
Time:
Prints:
Result:
Note:
bizhub 360
Time required for a communication is shown.
The number of pages transmitted is shown. In the case of memory
transmission, the number of pages able to be transmitted and the total
number of pages are shown in the form of a fraction.
OK Shown when communication ended normally.
S-OK Shown when communication was stopped.
PW-OFF Shown when the power switch is turned off.
TEL Shown when there has been an incoming tele-
phone call.
NG Shown when a communication error has oc-
curred.
Cont Shown when an error has occurred and the FK-
502 has switched to error page redialing.
No Ans Shown when the destination being called did
not answer.
Busy Shown when unable to complete communica-
tion due to the line being busy.
M-Full Memory-full is shown when the FAX file memory
became full during reception and reception
failed.
Any of the following remarks may be shown.
L1: Main Circuit
L2: Sub Circuit
TMR: Timer communication
POL: Polling
ORG: Original size set
FME: Frame Erase
MIX: Mixed size original
CALL: Telephone
CSRC: CS Remote Care
FWD: FORWARD
PC: PC-Fax
BND: Bind Position
SP: Special Original
FCODE: F code setting
RTX: Re-TX
RLY: Relay
MBX: Confidential
BLTN: Bulletin board
12
12-9