Konica Minolta bizhub 360 User's Manual [Fk-502 Facsimile Operations page 449

14
Terms
M
O
14-8
Description
Manual trans- This operation to send documents while con-
mission firming the status of the receiving machine.
Memory The location to store data. It is used to spec-
ify the communication or store the docu-
ment.
Memory over- The state of the fax image memory in this ma-
flow chine to be full during storing transmitted
document.
Memory RX The function to store the received document
and print the document as necessary.
Memory Sub- The function to store transmitted document
stitute Recep- in the memory automatically when the re-
tion ceived document cannot be printed due to
the machine being out of paper.
Memory trans- In this transmission method, all pages being
mission sent are first scanned and stored in memory
before transmission. The document is auto-
matically numbered by total page number,
and the images on the first page are shown
on communication results report.
However, when a large number of pages are
sent or when the images on the originals are
fine, memory capacity may be exceeded due
to the large amount of data stored in memo-
ry.
Mixed Original The function to set and send document pag-
es of mixed sizes by a single sequence of op-
erations.
Original size set The function to designate the paper size for
the document to be sent. Normally, when the
paper size loaded at the destination is too
small to accommodate the image being
transmitted, the original image will be re-
duced to fit the paper size. This feature gives
you the option printing a portion of the image
with no reduction.
Originating sta- The facsimile to provide instruction to send
tion document to multiple stations.
Overseas TX The international communication. In Over-
seas TX, a lower baud rate will be employed.
Select this mode if you send a fax to the lo-
cation at which the communication condition
is poor even if it is in your country.
Appendix
bizhub 360