Administrator Setting >> Fax Setting >> Function Setting - Konica Minolta bizhub 360 User's Manual [Fk-502 Facsimile Operations

Utility Mode
11.2.10Administrator Setting >> Fax Setting >> Function Setting
Turns ON/OFF transmission/reception functions. (page 11-36)
Item
F-Code
TX
Relay RX
Relay
Print
Destina-
tion
Check
Display
Function
Memory RX
Closed Net-
work RX
Forward TX
Setting
Incomplete TX
Hold
PC-Fax RX Set-
ting
bizhub 360
Description
For details, see "Turning ON/OFF
transmission/reception functions" (p.
11-36).
Broadcast the document received
from the originating station as an in-
termediate relay station to the termi-
nating station. To use the Relay RX
function, the Relay User Box should
be registered.
Print the document received from the
originating station.
Set whether or not to display the list
of destinations specified at the time
of facsimile transmission.
The memory reception is the function
used to receive documents and store
in memory so that you can print them
out later as necessary.
The closed area reception is the
function used to receive the incom-
ing data only when the sender's
password is valid.
The Fax transfer is the function used
to transfer the received data to a cer-
tain station determined in advance.
Documents which could not be
transmitted by the auto redial func-
tion because of a communication er-
ror or busy remote station is saved
temporarily in the Fax Retransmit
User Box.
The PC-Fax RX Setting feature offers
a procedure for saving files contain-
ing received faxes in Boxes on the
hard disk.
By setting to ON the PC-Fax RX Set-
ting function, you can set up whether
or not to print the data received and
set up the Communication Pass-
word.
This is not displayed if the optional
hard disk is not installed.
Available value
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
Set a password in 4 digits.
*
OFF / Forward & Print /
Forward & Print (If TX Fails)
Forward Dest.
*
ON / OFF
When the Incomplete TX
Hold is set to ON, specify
the Incomplete TX Hold
Time.
*
OFF / ON
Memory RX User Box /
Specified User Box
*
Save & Print (ON / OFF )
Communication Password
*
(ON / OFF )
11
11-9