Konica Minolta bizhub 360 User's Manual [Fk-502 Facsimile Operations page 33

2
No. Name
8 [Interrupt] key
9 [Reset] key
10 Auxiliary power button
11 [Stop] key
12 [Start] key
13 Main Power indicator
14 Data indicator
15 [Proof Copy] key
16 [C] (clear) key
17 Keypad
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 [Help] key
22 [Accessibility] key
23 Contrast dial
24 [Enlarge Display] key
2-4
Description
Press to enter Interrupt mode.
While the machine is in Interrupt mode, the indicator
on the [Interrupt] key lights up in green and the
message "Now in Interrupt mode." appears on the
touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Pressed to turn on/off machine operations, for exam-
ple, for copying, printing or scanning. When turned off,
the machine enters a state where it conserves energy.
Stops reading the original.
Press to start the operation that is selected Box mode,
Fax mode, Scan mode or Copy mode. While in Fax
mode, fax transmission is started.
When this machine is ready to begin operation, the in-
dicator on the [Start] key lights up in green. If the indi-
cator on the [Start] key lights up in orange, operation
cannot begin.
Lights up in green when the machine is turned on with
the main power switch.
Lights up at the time of transmission or reception of
FAX and when any document is saved in the Bulletin
Board User Box, Polling TX User Box, Memory RX
User Box or Fax Retransmit User Box.
Not used for Fax mode.
Press to erase a value entered using the keypad.
Use to type in the number. Use to type in the telephone
numbers and various set values.
Press to display screens showing the specified set-
tings.
Press to display the Meter Count screen and the Utility
screen.
Not used for Fax mode.
Press to display the Help Main Menu screen, where
descriptions of the various functions and details of op-
erations can be displayed. For details, refer to User's
Guide (Copy Operations).
Press to display the screen for specifying user acces-
sibility functions.
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Before Use
bizhub 360