[Stamp Settings]; [Fips Settings] - Konica Minolta bizhub 4050 User Manual

5.10 [Security Settings]

[Stamp Settings]

To display: [Utility] - [Administrator Settings] - [Security Settings] - [Stamp Settings]
Select whether or not to force application of stamps to original data when printing or sending a fax.
Settings
[Date/Time]
[Page Number]
[Stamp]
[Distribution Control
Number]
Tips
[Stamp] cannot be specified together with [Distribution Control Number]. If both options are specified togeth-
er, the first specified item is canceled.

[FIPS Settings]

To display: [Utility] - [Administrator Settings] - [Security Settings] - [FIPS Settings]
Specify whether to enable the FIPS (Federal Information Processing Standardization) Mode.
FIPS defines security requirements for cryptographic modules. These standards are adopted by many organ-
izations, including U.S. federal government agencies. Enabling the FIPS Mode makes the functions of the
machine conform to the FIPS.
[Invalid] is specified by default.
Tips
-
If you enable the FIPS mode, the device certificate registered on this machine will be deleted.
-
If the Enhanced Security Mode is enabled, the FIPS mode cannot be enabled.
[Description of Utility Keys]
Description
Select [ON] to print the date/time.
• [Data Format] : Select the format to print the date.
• [Time Format]: Select the format to print the time.
• [Text Details]: Specify the size of the text to be printed.
• [Print Position]: Select the position where to print the text.
[OFF] is specified by default.
Select [ON] to print page numbers.
• [Page Number Type] :Select the format to print page numbers.
• [Starting Page Number]: Enter the starting number of page numbers to be
printed on the first page using the Keypad.
• [Text Details]: Specify the size of the text to be printed.
• [Print Position]: Select the position where to print the text.
[OFF] is specified by default.
Select [ON] to print a stamp.
• [Stamp Imprint] : Select the stamp to be printed.
• [Text Details]: Specify the size of the text to be printed.
• [Print Position]: Select the position where to print the text.
[OFF] is specified by default.
Select [ON] to print out distribution control numbers.
• [+]/[-]: Enter the starting number of distribution control numbers using the
[+] or [-] key or the Keypad.
• [Text Size]: Specify the size of the text to be printed.
• [Density]: Select the density of the text to be printed.
[OFF] is specified by default.
5
5-36