[Tx/Rx Settings]; [Function Settings] - Konica Minolta bizhub 4050 User Manual

5.8 [Fax Settings]

[TX/RX Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings]
Specify how to print faxes received and how to handle files in a polling transmission.
Settings
[Duplex Print (RX)]
[Inch Paper Priority
Over A4]
[Print Paper Selection]
[Print Paper Size]
[Tray Selection for RX
Print]
[Reduction Ratio]
[Print Separate Fax
Pages]
[File After Polling TX]

[Function Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings]
Configure the settings for using various fax transmission and reception functions.
Settings
[Function ON/OFF Set-
ting]
[F-Code TX]
[Dest. Check Dis-
play Func.]
[Confirm Addr (TX)]
[Description of Utility Keys]
Description
Select whether or not to print an original on both sides of paper when a multi-
page fax is received.
This option is not available if [Print Separate Fax Pages] is set to [ON].
[OFF] is specified by default.
Select whether or not to preferentially print an original on inch-sized paper
when a fax is received.
The default value depends on the region the machine is used in.
Select the criterion of selecting paper for printing a fax.
• [Auto Select]: Prints a fax on paper that is automatically selected to suit the
fax received.
• [Fixed Size]: Print a fax only on the paper specified in [Print Paper Size].
• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the ma-
chine runs out of specified paper, paper of the next closest size is used.
[Auto Select] is specified by default.
Select size of paper for printing received fax.
The initial value varies depending on the setting for [Inch Paper Priority Over
A4].
Note
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to
[Auto].
Specify a paper tray if you want to fix the paper tray used to print a fax.
[Auto] is specified by default.
If necessary, change the reduction ratio that is used when printing a fax.
[96%] is specified by default.
Note
If [Reduction Ratio] is set to [100%], [Print Paper Selection] is set to [Auto Se-
lect], [Tray Selection for RX Print] to [Auto] and [Print Separate Fax Pages] to
[OFF].
Select whether or not to print a fax longer than the standard size on separate
pages.
This option is not available if [Duplex Print (RX)] is set to [ON].
[OFF] is specified by default.
Select whether or not to delete a file after it is sent in response to a polling re-
quest if Polling TX is used to register files for polling.
[Delete] is specified by default.
Description
Enable or disable fax transmission and reception functions, such as Confirm
Address that prevents wrong fax transmission, F-Code TX, and Relay RX.
Select whether or not to use F-Code TX.
This option is available for confidential transmission or relay request.
[ON] is specified by default.
Select whether or not to show a list of specified destinations before sending a
fax.
[OFF] is specified by default.
Select whether or not to require the user to enter a fax number twice to send
a fax by directly entering the fax number.
This is convenient to prevent a fax from being sent to an incorrect destination.
[OFF] is specified by default.
5
5-25