[Ftp] - Konica Minolta bizhub 4050 User Manual

[FTP]

To display: [Utility] - [One-Touch/User Box Registration] - [FTP] - [New]
Register the host name or IP address of the destination FTP server.
Settings
[No.]
[Name]
[Favorite]
[Index]
[Connection]
[Host Name]
[File Path]
[User ID]
[Password]
[Detail Setting]
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Settings].
- To change the settings for a registered destination, select the registered name, then tap [Edit].
- To delete a registered destination, select the registered name, then tap [Delete].
[Description of Utility Keys]
Description
Destination registration number. The smallest available number that is not
used is automatically assigned.
Enter the destination name (using up to 72 characters).
Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorite], enabling you to easily specify a destination.
Select a corresponding character so that the destination can be index
searched by name.
Register information of the destination FTP server.
Enter the host name or IP address of the destination FTP server (using up to
253 bytes).
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Tapping [Details] displays the full text of the host name.
Enter the name of the storage folder in the FTP server specified in [Host Name]
(using up to 127 bytes).
• Entry example: "scan"
When specifying a folder in the FTP folder, insert a symbol, "/", between the
folder names.
• Entry example: "scan/document"
When the file path is not specified, only enter the "/".
• Entry example: "/"
Tapping [Details] displays the full text of the file path.
If authentication is required in the destination FTP server, enter the available
user name to log in (using ASCII characters of up to 63 bytes).
Enter the password (using up to 63 bytes).
Configure settings to establish communications with the FTP server.
• [Port No.]: If necessary, change the port number. Normally, you can use the
original port number. [21] is specified by default.
• [Pasv]: When the PASV mode is used in your environment, select [ON]. [ON]
is specified by default.
• [Proxy]: When a proxy server is used in your environment, select [ON].
[OFF] is specified by default.
3
3-5