Copier Settings]; [Auto Zoom For Combine]; [Default Copy Settings]; [Separate Scan Output Method] - Konica Minolta bizhub 4050 User Manual

4.3

[Copier Settings]

4.3 [Copier Settings]

[Auto Zoom for Combine]

To display: [Utility] - [User Settings] - [Copier Settings] - [Auto Zoom for Combine]
Select whether or not to adjust the image automatically to optimal zoom ratio when you specify [Combine]
and select [Auto] for [Paper].
- [Auto Display Zoom Ratio]: Automatically adjusts to the optimal zoom ratio.
- [OFF]: Select this option to specify the zoom ratio manually.
[Auto Display Zoom Ratio] is specified by default.

[Default Copy Settings]

To display: [Utility] - [User Settings] - [Copier Settings] - [Default Copy Settings]
Change the default settings (settings when the power is turned on, or the Reset is pressed) in copy mode.
You can change the setting by selecting [Current Setting] after the setting in copy mode is changed.
[Factory Default] is specified by default.

[Separate Scan Output Method]

To display: [Utility] - [User Settings] - [Copier Settings] - [Separate Scan Output Method]
Select the timing that the machine starts printing when scanning an original by specifying [Separate Scan].
-
[Page Print]: Printing begins while the original is being scanned. Select this option if you want to focus
on efficiency.
- [Batch Print]: Printing begins after all originals are scanned. You can delete data before printing begins
if you find an incorrect setting etc.
[Page Print] is specified by default.
[Description of Utility Keys]
4
4-6