Communication; Initial Communications Settings - Powerware Prestige 6000 Installation And Operator's Manual

C H A P T E R 5
C
OMMUNICATION
The UPS is equipped with a communications interface port that allows
communication with a wide variety of external devices including:
:
:
:
:
The serial port enables you to monitor and record diagnostic data with
the following communication interfaces:
:
:

Initial Communications Settings

The UPS is factory-configured for one of several communication
interfaces (usually determined by the customer). To determine the
initial UPS communications configuration, you can:
:
:
:
If you want to change the UPS configuration settings, use the front panel
or the UPS Serial Communications Menu.
Powerware ® Prestige Series Installation and Operator's Manual for IBM Applications (6000 VA) Uncontrolled Copy
Video or dumb terminal
Serial printer
Computer with power management or shutdown software
AS/400 systems
Serial Communications Interface
Terminal Mode
Data Dump Mode
Printer Mode, 2400 Baud, with Novell Contacts (default)
Printer Mode, 19200 Baud, with Novell Contacts
LAN Configuration
9
Novell-Style Network Interface
9
3Com-Style Network Interface
9
AS/400-Style Network Interface
Custom User-Configurable Interface
Look at the box label with the serial number (communication mode
is shown in the upper right corner).
Use the Display Configuration option on the UPS Serial
Communications Menu (see page 58).
For assistance with IBM 9910 UPSs, see Chapter 8, "Service and
Support" on page 75.
55