Powerware Prestige 6000 Installation And Operator's Manual page 67

Powerware ® Prestige Series Installation and Operator's Manual for IBM Applications (6000 VA) Uncontrolled Copy
NOTE Catalog #, Serial #, and Version # are all identification numbers unique to your
UPS and can also be found on the UPS nameplate.
1 > Continuous Dump
information to the computer. Baud rates of 1200 to 2400 are
recommended to reduce host computer overhead when using
this mode.
2 > Polled Dump
requested by a poll character (Control-E).
3 > Smart Dump
in the previous mode. However, the transmission also occurs
automatically whenever UPS status changes. For example, if
there is a power outage, UPS status information changes and is
therefore, automatically transmitted.
A > ASCII Terminal
attached video terminal.
B > VT100 Terminal
attached video terminal.
P > Printer Dump
attached printer.
L > LAN Configuration
LAN mode and displays the Select LAN Configuration Menu.
8h‡hy‚t Æ) 9 $ ! !$!
Tr…vhy Æ) 7F"("7!&#
Wr…†v‚ Æ) !
8PHH €‚qr) Q…v‡r…
7hˆq ‘ ) !#
G6I €‚qr) I‚‰ryy
Ir 8PHH) 6T8DD
Ir 7hˆq) (%
Ir G6I) I‚‰ryy
Q…r†† †ƒhpr ih… ‡‚ p‚‡vˆr
The UPS regularly transmits status
Status information is transmitted only when
Status information is transmitted when polled, as
The UPS displays the formatted data on the
The UPS displays the formatted data on the
The UPS prints the formatted data on the
allows you to configure the UPS for a new
Communication
59