Introduction
Special Symbols
The following common symbols may be found on the UPS:
6
Powerware
LOAD ON
- Press the button with this symbol to energize the
output receptacles (Output On).
LOAD OFF
the output receptacles (Output Off).
SAFETY EARTHING TERMINAL
ground.
RISK OF ELECTRIC SHOCK
shock is present and the associated warning should be
observed.
CAUTION: REFER TO OPERATOR'S MANUAL
operator's manual for additional information.
INPUT BREAKER
off utility power to the PPU.
BATTERY BREAKER
shuts off battery power (power transmission through the
battery cord).
BATTERY CONNECTOR
which remains electrically "hot" even with the battery
breaker off. Keep covered when not in use.
- Indicates the input to a unit.
INPUT
OUTPUT
- Indicates the output from a unit.
- Indicates the Maintenance Bypass switch.
BYPASS
®
Prestige Series Installation and Operator's Manual for IBM Applications (6000 VA) Uncontrolled Copy
- Press the button with this symbol to de-energize
- Indicates the primary safety
- Indicates that a risk of electric
- Indicates the input breaker, which shuts
- Indicates the battery breaker, which
- Indicates the battery connector,
- Refer to your