Cpuconfig; Syntax; Parameters; Operation - HP AB464-9003F Service Manual

Example 7 boottest command
Shell> boottest
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Example 8 boottest early_cpu off command
Shell> boottest early_cpu off
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test

cpuconfig

Use this command to display the configured or deconfigured state of processors in the system
and enables the user to configure or reconfigure processors.

Syntax

cpuconfig <cpu> <on | off>

Parameters

<cpu>
<on | off>

Operation

Issue cpuconfig with no parameters to display the configured or deconfigured status of all
processors. To reconfigure CPUs, specify a CPU number and a state on or off. If you enter a
valid state that is different from the current state of a CPU, its status changes on the next boot.
NOTE: The last remaining configured CPU in a system cannot be deconfigured.
322 Utilities
Setting
-------------------------
On (OS speedy boot aware)
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Setting
-------------------------
On (OS speedy boot aware)
Skip this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
specify a processor
state to set the processor to