HP AB464-9003F Service Manual page 304

Hpe integrity rx6600 server user
Table of Contents

Advertisement

CAUTION:
data stored on that disk drive. The operation cannot and should not be interrupted; doing so may
result in irreparable damage to the hard disk drive.
Operation
Unless you include <no prompt> on the command line, warning messages display. You are
required to properly answer a series of prompts or the command aborts. The answers are case
sensitive and must be entered in upper case.
This command will not complete and return to a shell prompt until the format operation is complete.
Depending on the capacity and model of disk drive, this can take a considerable amount of time.
STATUS
The STATUS command displays the status of any volume synchronization operation that is
currently in progress on the controller.
Syntax
cfggen <controller #> status
Parameters
<controller #>
Operation
If no volume synchronization is in progress, CFGIR prints a message so indicating before exiting.
The STATUS command adds the Inactive flag to the Volume State field, if the volume is marked
as inactive by the controller firmware.
Sample Output
The following is an example of the status information returned when a volume resynchronization
is in progress.
Background command progress status for controller 0...
IR Volume 1
Current operation
Volume ID
Volume status
Volume state
Physical disk I/Os
The status fields in the data displayed can take on the following values:
Current operation
Volume status
Volume state
Physical disk I/Os
ENABLEIR
The ENABLEIR command turns on IR functionality on a SAS controller. To accomplish the
enabling, clear the MPI_IOUNITPAGE1_DISABLE_IR bit in the IO Unit 1 MPT Configuration
page.
Syntax
cfggen <controller #> enableir
Parameters
<controller #>
304 Core I/O Card Utilities
Performing a low-level format on a hard disk drive results in the destruction of all
A SAS controller number between 0 and 255.
Synchronize or None
Enabled or Disabled
Inactive] Optimal, Degraded or Failed
Quiesced or Not quiesced
A SAS controller number between 0 and 255.
: None
: 2
: Enabled
: Optimal
: Not quiesced

Advertisement

Table of Contents
loading

Table of Contents