Table of Contents
Advertisement
To ensure you have the latest version of the firmware running on the server, download the latest
version of the firmware from the web, and create a CD to install the firmware on the server.
Downloading the Latest Version of the Firmware
To download the latest version of the firmware from the web, follow these steps:
1.
Go to http://www.hpe.com/support/hpesc.
2.
Select download drivers and software.
3.
Select Itanium-based servers from the Server category.
4.
Select your server from the servers listed.
5.
Select your operating system.
6.
Select the firmware category you want to download.
7.
Download the firmware to a CD.
Installing the Latest Version of the Firmware on the Server
To install the latest version of the firmware on the server, follow these steps:
1.
Start a server console session. See
2.
Insert the CD with the copy of the latest version of the firmware.
3.
Using the EFI Boot Manager menu, boot to the drive that contains the CD with the updated
firmware.
4.
Follow the instructions to update the firmware.
Enabling the Trusted Platform Module
This section provides instructions on how to enable the trusted platform module (TPM).
Introduction
The TPM is an optional security component which enhances security capabilities for the server
if it is running the HP-UX operating system. The TPM is a security chip that is unique to the
server. It performs key security processes independent of other hardware components. The TPM
creates and stores additional encryption keys from the root key of the system. The encryption
keys created by the TPM encapsulate system application encryption keys to provide an additional
layer of security for sensitive system data.
The fundamental capabilities of the TPM include:
Platform authentication
Sensitive information protection
Data integrity
System privacy
IMPORTANT:
the TPM security component.
WARNING!
disconnected from the server prior to performing this procedure.
Voltages are present at various locations within the server whenever an AC power source is
connected. This voltage is present even when the main power switch is in the off position.
Failure to observe this warning can result in personal injury or damage to equipment.
CAUTION:
follow ESD safety precautions can result in damage to the server.
You must run the supported version of the HP-UX operating system to utilize
Ensure that the system is powered off and all power sources have been
Observe all ESD safety precautions before attempting this procedure. Failure to
Section : "Console Setup" (page
Enabling the Trusted Platform Module
76).
115
Advertisement
Table of Contents
Troubleshooting
