Booting And Shutting Down Linux; Adding Linux To The Boot Options List - HP AB464-9003F Service Manual

3. Issue the shutdown command and the appropriate options to shut down the Windows
Server 2003 on the system.
Use one of the following options when shutting down Windows:
To shut down Windows and reboot, issue the following command:
shutdown /r
To shut down Windows and power off server hardware, issue the following command:
shutdown /s
NOTE:
command at the iLO 2 MP Command menu
To abort a shutdown, issue the following command:
shutdown /a
For example:
shutdown /r /t 60 /c "Shut down in one minute."
This command initiates a Windows system shutdown and reboot after a timeout period of
60 seconds. The /c option specifies a message that is broadcast to any other users of the
system.

Booting and Shutting Down Linux

This section covers booting and shutting down Linux on entry class Hewlett Packard Enterprise
servers. Procedures for Red Hat Enterprise Linux and SuSE Linux Enterprise Server are included
in this section.
To add a Linux entry to the boot options list, see
(page 130).
To boot Linux on entry class Integrity servers, use the following procedures.
◦
See
◦
See
To shut down either Red Hat Enterprise Linux or SuSE Linux Enterprise Server, see
Down Linux" (page

Adding Linux to the Boot Options List

This section describes how to add a Linux entry to the system boot options list. The processes
for adding both Red Hat Enterprise Linux and SuSE Linux Enterprise Servers are included.
NOTE: On Integrity servers, the operating system installer automatically adds an entry to the
boot options list.
To add a Linux item to the boot options list, follow these steps:
1. Access the EFI Shell.
a. Log in to the iLO 2 MP and enter the CO command to access the system console.
b. Confirm that you are at the EFI Boot Manager menu (the main EFI menu). If you are at
another EFI menu, select Exit from the submenus until you return to the screen with the
EFI Boot Manager.
c. Select the EFI Shell to access the EFI Shell environment.
130 Booting and Shutting Down the Operating System
To reboot a powered off system you must power on the system using the PC
"Booting the Red Hat Enterprise Linux Operating System" (page
"Booting the SuSE Linux Enterprise Server Operating System" (page
133).
"Adding Linux to the Boot Options List"
131).
132).
"Shutting