Omron fq2 User Manual page 89

Expression text string Data name
Y0 Edge 0 position Y
X1 Edge 1 position X
Y1 Edge 1 position Y
TH Angle (edge angle)
SX0 Edg0 ref. pos. (edge 0
reference position X)
SY0 Edg0 ref. pos. Y (edge
0 reference position
Y)
SX1 Edg1 ref. pos. X (edge
1 reference position
X)
SY1 Edg1 ref. pos. Y (edge
1 reference position
Y)
STH Reference angle
FQ2 User's Manual
Description
This is the Y coordinate of the measured
edge 0 position.
This is the X coordinate of the measured
edge 1 position.
This is the Y coordinate of the measured
edge 1 position.
This is the measured angle.
This is the X coordinate of the edge 0
position when it was registered.
This is the Y coordinate of the edge 0
position when it was registered.
This is the X coordinate of the edge 1
position when it was registered.
This is the Y coordinate of the edge 1
position when it was registered.
This is the angle when the edge was reg-
istered.
Data range
−99,999.9999 to 99,999.9999
−99,999.9999 to 99,999.9999
−99,999.9999 to 99,999.9999
−180 to 180
−99,999.9999 to 99,999.9999
−99,999.9999 to 99,999.9999
−99,999.9999 to 99,999.9999
−99,999.9999 to 99,999.9999
−180 to 180
Adjusting the Images That Were Taken
87