Omron fq2 User Manual page 410

Menu command
Model region Used to specify the region of the image
Add
Delete
Copy
Console
OR/NOT
One/All
Insp. region
Detection
point
Insp. region
Color ON/
OFF (for
Edge width
and Edge
position
Only)
Set color.
Color pal-
ette
Insp. region
Set color
Color pal-
ette
Display
Setting
Back-
ground
color
Insp. region
408
Menu Tables
Description
to register as the model with a combina-
tion of figures.
Adjusts the size and position of the mea-
surement region.
You can specify which part of the model
to detect as coordinates during inspec-
tions.
Adjusts the size and position of the mea-
surement region, changes the measure-
ment direction, etc.
Sets whether to specify an edge color.
Specifies the color of the image for edge
detection (i.e., the border between the
measurement object and background).
Displays a palette for color specification.
Adjusts the size and position of the mea-
surement region.
The color for which to find the area is
specified.
Displays a palette for color specification. Hue: 0 to 359, Saturation: 0 to 255
Specifies the type of image to display on
the color specification display to check
on the image the color that was set for
the reference color.
Specifies the background color of the
extracted image.
Moves the measurement region or
adjusts the size of the measurement
region.
Setting range
---
Rectangle, Ellipse, Wide circle, or Poly-
gon
---
---
---
OR (default) or NOT
One or All
---
---
---
ON or OFF (default)
R: 0 to 255
B: 0 to 255
G: 0 to 255
---
---
Brightness: 0 to 255
Exclusion: ON or OFF
Color inv.: Yes or No (default)
Measurement Image, All Color Image
(default), Selected Color Image, or
Binary Image
Black (default), white, red, green, or blue Scene
---
Data Refer-
ence
Scene p. 100,
p. 110,
p. 117
Scene p. 100
Scene
Scene ---
Scene p. 101
Scene p. 101
Scene ---
Scene p. 102
Scene p. 102
Scene p. 125,
p. 129,
p. 133
Scene p. 124
Scene
Scene p. 144,
p. 152
Scene p. 142,
p. 148
Scene
Scene
Scene p. 139
FQ2 User's Manual