Table of Contents
Advertisement
Wiring Sensor Data Units
Parallel Interface Sensor Data Unit (FQ-SDU1@)
FQ-WU0@@
Sensor Data Unit Cable
(Screw size: M3,
Tightening torque:
0.54 N·m)
For the I/O connector harness, use an FQ-VP1@@@ Parallel Cable for the FQ-SDU1 or a MIL-standard
harness, such as the OMRON XZ2F. (The Cables are sold separately.)
Signal
Power supply (24 V)
Power supply (0 V)
Frame ground
44
Wiring
FQ2-S3 (Sensors with Built-in Lighting or
Sensors with C-mounts)
Power supply (24 V)
Power supply (0 V)
Frame ground
Application
These terminals are for the external power supply (24 V).
Important
• Wire the power supply separately from other devices. If the wiring for other devices is placed
together or in the same duct as the wiring for the Vision Sensor, the influence of electromagnetic
induction may cause the Sensor to malfunction or may damage it.
• Do not allow the load current to exceed 50 mA. The output circuit may be damaged if the load cur-
rent exceeds 50 mA.
This is the frame ground terminal. Connect it to the ground wire.
1
2
31
32
3
4
33
34
5
6
35
36
7
8
37
38
9
10
39
40
11
12
41
42
13
14
43
44
15
16
45
46
17
18
47
48
19
20
49
50
21
22
51
52
23
24
53
54
25
26
55
56
27
28
57
58
29
30
59
60
FQ2 User's Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
