Omron fq2 User Manual page 413

Menu command Description
Rotation Sets the angle range for the registered
model.
Angle range
Sub-pixel You can increase the accuracy of mea-
surement positioning.
Extraction
condition
Candidate Sets the detection target to only objects
level with a correlation above the specified
candidate level.
Extraction Results are output only for objects with a
X measured X coordinate that is within this
range.
Extraction Results are output only for objects with a
Y measured Y coordinate that is within this
range.
Detection Sets the maximum number of detection
count results to output.
Multi-point Sets whether to output only the result
output with the highest correlation, or to output
all results that meet the specified extrac-
tion conditions.
Sorting Sets the sort condition to use when mul-
method tiple measurement results meet the
extraction conditions.
Reflect You can specify whether to reflect the
ment results of an inspection item in the
overall judgement.
FQ2 User's Manual
Setting range
No (default), Yes
−180 to 180
No (default), Yes
0 to 100 (default: 60)
−999,999,999.9999 to 999,999,999.9999 Scene
−999,999,999.9999 to 999,999,999.9999 Scene
1 to 32
OFF (default) or ON
Corr. ascending order, Corr. descending
order (default), Pos.X ascending order,
Pos.X descending order, Pos.Y ascend-
ing order, Pos.Y descending order
None, Yes (default)
Data Refer-
ence
Scene p. 99
Scene p. 99
Scene p. 97
Scene
Scene p. 98
Scene
Scene p. 98
Scene p. 97
Scene p. 98
411
Menu Tables