Omron fq2 User Manual page 415

Menu command Description
Reflect You can specify whether to reflect the
judgement results of an inspection item
in the overall judgement.
Fill profile You can set how to process holes for an
Area inspection item.
Reflect You can specify whether to reflect the
judgement results of an inspection item
in the overall judgement.
Filling up Sets how to process areas surrounded
holes by the specified color.
Extract Select this option if there are areas of the
image specified color inside the measurement
region that you do not want to measure.
Extraction
condition
Number of Set the maximum number of labels to
labels detect.
Area Specify the area range to judge as a
label.
Gravity X Specify the gravity X position to judge as
a label.
Gravity Y Specify the gravity Y position to judge as
a label.
Sorting Set the condition to use for label number
method reassignment.
Reflect You can specify whether to reflect the
judgement results of an inspection item
in the overall judgement.
FQ2 User's Manual
Setting range
No, Yes (default),
None (default), Filling up holes, Fill Out-
line
No, Yes (default),
Yes, No (default)
Yes, No (default)
Range: 1 to 100
Default: 100
Range: 0 to 999,999,999.9999
Defaults: Upper limit: 999,999,999.9999,
Lower limit: 0
Range: −99,999,999.9999 to
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: ?999,999,999.9999
Range: −999,999,999.9999 to
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: −999,999,999.9999
Area ascending order, Area descending
order (default), Pos. X ascending order,
Pos. X descending order, Pos. Y ascend-
ing order, Pos. Y descending order
No, Yes (default),
Data Refer-
ence
Scene p. 138
Scene p. 144
Scene p. 142
Scene p. 150
Scene p. 150
Scene p. 151
Scene
Scene
Scene
Scene
Scene p. 151
Scene p. 152
413
Menu Tables